SwineFarming.org

Home › Articles › Swine Nutrition Deep Dives › Pellet Quality: Durability Index and Pig Performance

Swine Nutrition Deep Dives

Pellet Quality: Durability Index and Pig Performance

Pelleting compresses ground, conditioned feed into uniform pieces that reduce dust, improve handling and typically raise feed efficiency compared with meal. Those benefits depend on pellets arriving at the feeder intact. When pellets break into fines, pigs sort the fines, waste feed and eat unevenly, and the advantages disappear. This article explains the pellet durability index, what affects pellet quality in the mill, how to test it, how pellet quality changes pig performance, and the trade-offs between pellets, meal and ulcer risk. It is written for producers and mill managers alike.

What pelleting does for pigs

Heat, moisture and pressure gelatinize part of the starch, kill many bacteria and bind ingredients so pigs cannot pick out favorite particles. Studies commonly report improvements in feed conversion of several percent for pelleted compared with meal feed in grow-finish pigs, along with modest changes in gain, depending on pellet quality and diet. Pelleting also reduces dustiness and bridging and allows higher-density storage. The costs are energy, conditioner steam, die and roller wear, heat loss of some additives and the ulcer risk linked to fine particle size.

Understanding the durability index

The pellet durability index, or PDI, measures the share of pellets that remain intact after a standardized tumbling test. A sample of sieved pellets is tumbled for a set time and sieved again, and the weight remaining on the screen is divided by the original weight. A PDI of 90 percent or more is generally considered good for swine, and commercial mills often aim for 90 to 95 percent. A modified method adds steel nuts to the tumbler to simulate harsher handling. Report which test method is used, since results differ.

Mill factors that drive quality

FactorEffect on durability
Conditioning temperature and timeHigher temperature and longer retention improve starch gelatinization and binding
Steam qualityDry, saturated steam works best; wet steam makes soggy pellets
Die thickness and hole sizeThicker dies and smaller holes compress harder
Particle sizeFiner particles bind better but cost grinding energy
Roller gap and wearWorn rollers lower throughput and quality
Cooling and dryingRapid cooling prevents cracking and moisture problems

Formulation effects

Starch generally helps pellet formation, so high-corn diets pellet well. Fat added in the mixer above a few percent acts as a lubricant that reduces durability, so high-fat diets often receive the fat after pelleting by coating. Fibrous ingredients can improve or worsen quality depending on type, while ingredients such as wheat and certain binders give stickiness. Whey products and molasses can aid binding but stick to equipment. Pellet binders, such as lignosulfonates or bentonite, are used when the formula struggles. Our articles on feed particle size and whey permeate cover related effects.

Heat-sensitive additives

High conditioning temperatures can destroy enzymes, probiotics, vitamins and some amino acid products. Use heat-stable forms, coated products or post-pelleting application with a liquid sprayer. For example, phytase products may specify a maximum temperature; check the supplier's data, as discussed in phytase superdosing. Vitamin loss and premix stability appear in vitamin-trace mineral premix stability. Heat treatment can also lower the risk of Salmonella in feed, which is an advantage for biosecurity.

Handling damage after the mill

Even a good pellet breaks during transport, bin filling, augers and feeders. Reduce drop heights, use slower augers, avoid sharp bends and fill bins carefully. Pellets that arrive as 20 percent fines are a delivery problem, not a milling problem. Take samples at the mill, from the truck and from the feeder, and compare durability and fines at each point to find where damage occurs. Report poor delivery to the supplier with sample data.

Effects on performance and waste

Fines are less palatable to some pigs, may be left in the feeder, and cause bridging in feeders and nurseries. Pigs may eat less, and wasted feed raises feed cost per pound of gain. Results from experiments show that feed efficiency declines as the percentage of fines increases, with notable declines when fines exceed roughly 20 to 30 percent. Maintain fines below about 10 percent in the feeder if possible. See feed waste reduction for feeder adjustments.

Pellets versus meal: a decision guide

  • Choose pellets when feed conversion improvement more than covers the added pelleting cost per ton.
  • Choose meal when particle size is already well managed, mill energy is expensive or ulcer risk is a concern.
  • Use pellets for young pigs when intake and sorting are issues.
  • Consider crumbles for the youngest pigs and pelleting only the grower diets.
  • Reassess when grain prices change, since the benefit is larger when feed is expensive.

Quality checks you can do on the farm

Rinse a handful of pellets through a coarse sieve and weigh the fines. Squeeze pellets between fingers: those that crumble easily are fragile. Record fines at the feeder weekly, together with feed disappearance and feeder adjustment. Ask your supplier for PDI results with each batch. Coordinate these records with feed conversion ratio and feed cost as a percentage of total costs to see the financial effect.

FAQ

What PDI should I ask for?

Many swine mills aim for 90 to 95 percent, but check which test method is used since methods differ.

Do pellets always improve feed efficiency?

Usually by a few percent, but benefits fall if pellets break into fines or if fine grinding raises ulcer problems.

Why do pellets break down in my feeder?

Rough handling in augers and bins, poor pellet quality at the mill, or wet conditions can all create fines, so sample at each stage.

Keep learning

Browse all 700 guides →