Feed conversion ratio, or FCR, tells you how many pounds of feed it takes to produce one pound of live weight gain. It is the single most useful number for judging whether your feeding program, genetics, housing and health are working. A pig that needs less feed per pound of gain costs less to raise, uses fewer crop resources and produces less manure. This guide explains how to calculate FCR on your own farm, what typical values look like and what you can do to improve it.
How to calculate FCR
The formula is simple: FCR equals total feed eaten divided by total weight gained. If a group of pigs ate 5,500 pounds of feed while gaining 2,000 pounds, the FCR is 2.75. A lower number is better. You need accurate feed records and accurate weights at the start and end of the period, which means you must weigh the pigs or estimate weight with a tape and a table, and measure feed in and out of the feeders. Keep the feed delivery slips, subtract leftover feed in bins and note any spilled or wasted feed.
Another version, feed efficiency, is the inverse: pounds of gain per pound of feed. An FCR of 2.75 equals a feed efficiency of about 0.36. Many scientists and some companies use gain to feed; many farmers use feed to gain. Be sure which one you are looking at when comparing numbers.
What are typical values?
FCR rises as pigs grow, because older pigs deposit more fat, which takes more feed energy than lean tissue, and because maintenance needs are larger. Typical ranges, which vary by genetics, diet and environment, are roughly:
| Stage | Typical FCR range |
|---|---|
| Nursery (15-50 lb) | 1.4-1.8 |
| Grower (50-120 lb) | 2.3-2.7 |
| Finisher (120-280 lb) | 3.0-3.6 |
| Whole period, wean to market | About 2.5-2.9 in commercial herds |
Commercial herds with modern genetics, high health and good facilities often reach the better end of these ranges, while small herds in less controlled environments may see higher numbers. Compare yourself against your own history first, then against local averages from extension or your feed supplier.
Why FCR matters economically
Because feed is the largest cost, a small change in FCR changes profit. Suppose the cost of feed per pound is constant: a drop of 0.1 in FCR across a pig that gains 220 pounds saves 22 pounds of feed. Multiplied by the feed price and the number of pigs per year, it adds up quickly. FCR also interacts with days to market: a pig that grows faster spends less time using feed for maintenance. Budget examples appear in Pig Enterprise Budget: A Worksheet for Feeder-to-Finish and Farrow-to-Finish.
Factors that raise or lower FCR
- Genetics: lines selected for lean growth and efficiency convert feed better; see Crossbreeding Swine: Hybrid Vigor, Systems and Practical Plans.
- Health: respiratory or intestinal disease cuts intake and efficiency; see PRRS in Pigs: Porcine Reproductive and Respiratory Syndrome Explained and Swine Vaccination Programs: What to Vaccinate and When.
- Temperature: pigs outside their comfort zone burn feed to keep warm or eat less when hot; see Heat Stress in Pigs: Signs, Prevention and Cooling Methods and Winter Pig Care: Keeping Pigs Warm, Dry and Healthy in Cold Weather.
- Feed quality and form: well-ground, fresh, balanced feed with correct amino acids improves conversion; see Pig Feed 101: What to Feed Pigs at Every Stage.
- Feed wastage: poor feeder design and adjustment can waste five to ten percent or more of feed.
- Water access: inadequate or dirty water lowers intake and gain; see Water for Pigs: How Much, What Quality and How to Deliver It.
- Space and stress: crowding and fighting waste energy; see Pig Space Requirements: Square Feet Per Pig From Nursery to Sow.
- Sex and weight: barrows are fatter and less efficient than gilts at the same weight, and heavier pigs have higher FCR.
How to improve FCR step by step
Start by measuring. For one batch, record starting weights, feed delivered, feed left over and ending weights. Then work through the list above looking for the largest problem. Wastage is often the easiest fix: adjust feeder gates so that feed does not spill, repair leaks and keep feeders clean. Next, check barn temperature and ventilation, since a draft over resting pigs raises the cost of every pound of gain. Third, review vaccination and parasite control with your veterinarian. Finally, check feed formulation against current genetics; modern lean pigs often need higher lysine than older recommendations.
Be careful with feed additives and shortcuts
Do not chase low FCR by underfeeding protein or minerals. That can lower feed cost per day but reduces growth, delays market and can lower carcass value, increasing cost per pound sold. Likewise, selling pigs lighter to reduce cost of the heaviest gain can lower total revenue if the market pays by the pound, as discussed in Hog Prices Explained: Lean Hogs, Cutout, Base Price and What You Get Paid. Optimize the whole system, not one number.
Using records
Record FCR for each batch and graph it. If numbers rise suddenly, investigate before assuming bad feed; sick pigs, wasted feed or broken waterers are common causes. Simple record-keeping methods appear in Swine Record Keeping: What to Track, Templates and Why It Pays.
Worked example with real arithmetic
Suppose a pen of twenty pigs weighs 1,000 pounds in total at the start (50 pounds each) and 5,400 pounds at the end (270 pounds each). Total gain is 4,400 pounds. The bin records show 12,100 pounds of feed used. FCR is 12,100 divided by 4,400, or about 2.75. If feed costs a constant amount per pound, you can multiply 2.75 by the cost per pound to get feed cost per pound of gain, then compare that with the price of market pork. If the next batch lowers FCR to 2.65 by fixing feeder waste and heat issues, the savings per pig is 0.10 times 220 pounds, or 22 pounds of feed, which is real money on a hundred pigs.
Beware of misleading comparisons
Different farms measure FCR differently. Some include the nursery, some start at weaning and some at purchase weight. Some count feed delivered to the bin, others feed consumed. Some correct for dead pigs, others do not. When comparing, make sure the starting and ending weights and the treatment of mortality match, and ask whether numbers are on a live-weight or carcass basis. A published number is only useful when you know how it was measured.
FAQ
What is a good feed conversion ratio for pigs?
From weaning to market, about 2.5 to 2.9 pounds of feed per pound of gain is typical in modern commercial herds; small farms often see higher numbers.
How do I calculate FCR?
Divide the total pounds of feed eaten by the total pounds of weight gained over the same period.
Why does FCR get worse as pigs get heavier?
Older pigs put on more fat, which requires more feed energy per pound than lean tissue, and larger bodies need more feed for maintenance.