Mycotoxins are toxic compounds produced by molds growing on crops before or after harvest, and pigs are among the most sensitive farm animals. The main concerns in corn and small grains are deoxynivalenol (DON or vomitoxin), zearalenone, fumonisins, aflatoxins and ochratoxin. They reduce feed intake, impair growth, disrupt reproduction and suppress immunity. This article explains how to sample and test, what each toxin does, how to compare binder products, and how to build a risk management plan that fits your mill and herd. Follow regulatory limits for your region.
The main mycotoxins and their effects
| Toxin | Typical source | Main effects in pigs |
|---|---|---|
| Deoxynivalenol (DON) | Corn, wheat, barley | Feed refusal, vomiting, poor gain |
| Zearalenone | Corn, wheat | Swollen vulva, infertility, abortions |
| Fumonisins | Corn | Lung edema, liver damage |
| Aflatoxins | Corn, peanut and cottonseed meals | Liver damage, poor growth, immune suppression |
| Ochratoxin | Cereals | Kidney damage |
Young pigs and breeding animals are most sensitive. Several toxins often occur together, and combined effects can exceed those of each alone.
Why risk varies by year and storage
Weather during flowering and grain fill drives field molds such as Fusarium, which produce DON, zearalenone and fumonisins. Drought and heat favor Aspergillus and aflatoxin. Poor drying and storage allow molds to grow after harvest. Co-products like distillers grains concentrate toxins roughly threefold when starch is removed, so risk rises with their use; see DDGS inclusion limits. Stay informed on regional crop reports and your supplier's testing results each harvest.
Sampling is the biggest source of error
Mycotoxins are distributed unevenly in a lot, in hot spots, so a poor sample misleads. Take many small subsamples from different points and depths while loading or unloading, combine them, mix and submit a representative portion. Follow the laboratory's directions for sample size and handling. Rapid test kits are useful for screening, but they vary in accuracy; confirm with laboratory methods for high-stakes decisions. Further detail appears in feed sampling for mycotoxins.
Interpreting results
Guidance levels for pigs are set by regulators and differ among countries and by animal class. Typical advisory values are lower for sows and young pigs than for finishing pigs. Do not rely on a number from memory: look up the current guidance from your regulator or extension service. Remember that the safe level in the final diet, after dilution with other ingredients, is what matters. When results are near the limit, reduce use in sensitive classes first.
Binders and other tools
Mycotoxin binders are materials that adsorb toxins in the gut, so they pass through the pig. Their effectiveness depends on the toxin:
- Clay-based binders such as bentonite and aluminosilicates can bind aflatoxins well.
- They are generally weak against DON, zearalenone and fumonisins.
- Yeast cell wall products and modified glucomannans have some activity against several toxins.
- Enzymes and biotransforming agents break certain toxins down, for example fumonisin esterases, and some have regulatory approval.
- Antioxidants and extra nutrients may support animals under toxin stress.
Request independent data on the specific toxin, dose and animal class. A binder that is ineffective against your toxin is wasted money, and high doses can bind vitamins and minerals.
Practical management steps
- Test incoming grain and co-products, and reject or divert high lots.
- Blend contaminated lots with clean grain only where regulations allow.
- Divert contaminated feed to less sensitive classes such as finishers, never to breeding stock or young pigs.
- Clean grain to remove fines and broken kernels, where toxins concentrate.
- Keep storage dry, and clean bins, augers and feeders to prevent mold buildup.
- Check feed quality at the feeder, since moist feed molds quickly.
Recognizing a problem in the barn
The cost of getting this wrong is usually larger than the cost of testing. A single contaminated load fed to a sow herd can reduce conception and litter size for weeks, and feed refusal in a finishing barn can add many days to market. Compare a few hundred dollars of testing each harvest against the value of one batch of lost gain. Inexpensive prevention, such as clean bins and rapid drying of high-moisture corn, also pays far more than treatment after the fact.
Signs include off-feed groups, vomiting, reduced gain, red or swollen vulvas in gilts, abortions, increased stillbirths and loose stools. These signs are not specific, so involve your veterinarian and submit feed samples when problems appear. Compare affected and unaffected groups fed different lots. Stop feeding suspect feed while you investigate, but keep a retained sample from every batch. See feed storage for moisture control.
Building a written plan
Document who samples, how often, at what points, which lab, what action limits apply and which classes get which grain. Review the plan every harvest and record costs of tests, binders and diverted feed. If your insurance or feed contracts include mycotoxin provisions, keep records that support claims.
FAQ
Which mycotoxin is most dangerous for pigs?
Aflatoxin is the most toxic overall, but DON is the most common problem in practice, causing feed refusal and poor growth.
Do binders work against all mycotoxins?
No, most are effective against aflatoxin but weak against DON, zearalenone and fumonisins, so choose products based on the toxin you face.
Can I feed moldy corn to finishing pigs?
Visible mold is a warning sign, so test first and follow regulatory limits, and never feed suspect grain to sows or young pigs.