Mycotoxin testing is only as good as the sample. Toxins are distributed unevenly in grain, often concentrated in a few moldy kernels, so a handful of corn from the top of a truck can easily miss a problem or exaggerate one. Sampling error accounts for most of the uncertainty in mycotoxin results, far more than the lab method. This article explains how to collect a representative sample, how to handle and ship it, what to test for and how to interpret results with your veterinarian and nutritionist.
Why sampling is the weak link
Mold growth and toxin formation are patchy. A bin of corn may have several moldy pockets while the rest is clean. If you take one small sample from the grain surface, you might see none of it. The aim of sampling is to build up a composite from many small portions that represents the whole lot, then reduce it carefully to the amount the lab needs. The larger and more varied the collection points, the closer the result is to the true average. See Mycotoxin Risk Management: Binder Selection and Testing for how test results fit into a broader plan.
What to sample and when
Sample at points of decision: when grain arrives, when you buy ingredients, when a lot is moved into a bin, when feed is mixed, and when pigs show unexplained signs such as feed refusal, vomiting, poor growth, reproductive failure or vulvovaginitis. Weather matters too. Droughts, wet harvests, late planting and storage damage increase risk. Sampling the feed in the feeder and the feed in the bin helps trace the source. Always keep a retained portion of the sample.
Sampling methods by situation
| Situation | Method | Notes |
|---|---|---|
| Truck or trailer of grain | Probe at multiple locations and depths | Aim for many probes, more for larger loads |
| Grain bin | Sample during loading or unloading | Surface samples alone are not representative |
| Moving stream | Cross-stream sampler at regular intervals | Best method for large lots |
| Bagged ingredient | Sample from several bags | Include top, middle, bottom |
| Complete feed in feeders | Sample several feeders | Include pens with problems and without |
For a trailer, a common recommendation is to probe at several points, for example eight or more, and to combine the portions into an aggregate sample of several kilograms. Exact numbers depend on load size and official guidance for your region, so consult your lab or extension service.
Step-by-step procedure
- Use clean, dry tools and containers. Avoid cross contamination.
- Take many small increments across the lot, at different depths and positions.
- Combine them in a clean bucket and mix thoroughly.
- Reduce the combined sample to a smaller sample of at least about 1 to 2 kilograms by repeated dividing, not by scooping from the top. Ask the lab for its preferred size.
- Grind the entire sample before sub-sampling if the lab asks you to do so, since grinding makes toxins more evenly distributed.
- Place the sample in a clean, breathable bag or paper bag. Avoid sealed plastic for wet samples because moisture promotes mold growth.
- Label with date, source, lot and sampling point, and keep a duplicate.
- Send promptly or freeze if there will be a delay.
Which mycotoxins to test
Common problems in pig feed include deoxynivalenol (DON or vomitoxin), zearalenone, fumonisins, aflatoxins, ochratoxin A and T-2 toxin. The choice depends on the ingredient, the region and symptoms. A multi-toxin screen is usually more efficient than testing for one at a time, since several often occur together. Ask the lab which methods they use, their limits of detection and whether they report in parts per million or parts per billion.
Rapid tests versus laboratory methods
Test strips and rapid kits are convenient and useful for screening grain at the point of receipt. They are less precise than laboratory methods such as chromatography with mass spectrometry. Use rapid tests for quick decisions and confirm borderline or high results with an accredited lab. Remember that rapid test accuracy depends on sampling and grinding as well. Different methods can give different numbers, so compare like with like when tracking trends.
Interpreting results
Guidance levels for pigs vary by toxin, age and reproductive status. Sows and young pigs are generally more sensitive than finishers, and combinations can be worse than single toxins. Regulatory guidance values exist for some toxins in some regions, but regulatory limits are not the same as safe levels for a given pig. Discuss results with your veterinarian and nutritionist, who can advise on dilution, use in less sensitive classes, or discarding. Binders and detoxifiers have varying effectiveness depending on the toxin, and are covered in the mycotoxin management article. Check Feed Storage: Silo Management and Mold Prevention to prevent further growth.
Records and follow-up
Keep a log of sample date, source, test result and action taken. Track results by supplier and by field, so you can negotiate or change sources. Retest after any treatment or blending. If pigs have health problems, document clinical signs, feed intake and performance and share them with your veterinarian, because mycotoxicosis mimics many diseases. See also Gestating Sow Feeding: Body Condition Score Targets where reproductive effects may be noticed.
FAQ
How big a sample do I need for mycotoxin testing?
The lab will specify, but typically at least 1 to 2 kg after combining many small increments from across the lot.
Is a test from the top of the bin enough?
No. Toxins are unevenly distributed, so you need samples from many points and depths, ideally while loading or unloading.
Should I trust a negative rapid test?
Treat it as a screening result. If pigs show signs or the season is high risk, confirm with a laboratory.