Cull sows are breeding females removed from the herd, often because of age, lameness, reproductive failure, poor condition or injury. They are heavier than market pigs, frequently in poorer condition and more likely to be lame, which makes transport a major welfare risk. Studies and plant records show that cull sows account for a disproportionate share of transport losses and non-ambulatory animals. This article explains how to decide whether a sow is fit to travel, how to prepare animals, what trailers and handling methods reduce stress and injury, how weather and journey length matter and what to do with unfit animals. Rules vary by jurisdiction, so check current regulations and buyer requirements.
The welfare risks
Cull sows face several risks: lameness and weak legs that make loading and walking difficult, thin body condition that reduces insulation and energy reserves, fatigue and stress from handling, heat stress and cold stress, injuries from slipping, fighting or overcrowding and sudden death. They are large animals with heavy bodies that tolerate poorly any rough handling or steep ramps. Transport losses are a welfare issue as well as an economic loss. See Transport Stress: Loading and Journey Length for general effects of travel on pigs.
Fitness for transport
Before loading, assess each sow. Only animals that are fit to travel should be moved. Warning signs include:
- Inability to walk normally, bear weight on all legs or keep pace with others.
- Severe lameness, joint swelling or open wounds.
- Very thin body condition or obvious weakness.
- Labored breathing, fever or other signs of disease.
- Prolapse, hernia or large, painful masses.
- Advanced pregnancy or very recent farrowing, depending on rules.
Unfit animals should be treated, held until fit, or humanely euthanized on the farm, not shipped. Regulations and packer policies specify which conditions are not allowed; verify with your buyer. See Non-Ambulatory Pig Management.
Making the culling decision earlier
Many transport problems begin on the farm, when sows are held too long and become thin, lame or weak before shipping. Plan culling by monitoring body condition, lameness, reproductive performance and parity; see Sow Culling and Longevity: When to Cull, Parity Targets and Replacement Rates and Sow Body Condition: Caliper vs. Visual Scoring. Cull before animals deteriorate, and consider the effect of the whole herd's management on loss rates, as in Sow Mortality Reduction: A Management Priority. Some farms keep sows in a recovery pen on better feed before shipping when the veterinarian approves, but animals that cannot recover should not be prolonged.
Preparing for loading
Preparation reduces risk. Keep sows in their groups where possible, and avoid mixing unfamiliar animals right before transport, which causes fighting. Arrange feed withdrawal times appropriate to journey length as advised by your veterinarian or program, while ensuring access to water. Make sure the loading area has non-slip surfaces, a gentle ramp and good lighting. Plan timing to avoid hot or cold extremes. Use trained staff and low-stress methods rather than prods or shouting; see Pig Behavior and Safe Handling: How Pigs Think, Move and React and Fear Response in Pigs: Handling Implications.
Trailers and space
Trailers must be clean, in good repair, with non-slip flooring, adequate ventilation and enough space for sows to stand and lie down comfortably. Overloading raises the risk of piling, injury and death; underloading can cause animals to be thrown during braking. Space allowances vary by weight and by program, so check guidance from your veterinarian, the National Pork Board and your buyer. Compartments and partitions can limit movement and reduce injuries. Drivers should be trained and certified where possible; see Transport Certification: TQA Plus and Hauling Pigs Safely: Trailers, Loading, Weather, Space and Regulations.
Weather and journey length
Heavy sows are especially vulnerable to heat; they cannot sweat and quickly overheat on a stationary or poorly ventilated trailer. In hot weather, load early or late, minimize waiting, use ventilation and consider wetting animals according to program guidelines. In cold weather, use bedding and protect against wind and wet to prevent chilling, and avoid freezing temperatures where possible. Keep journeys as short as practical and plan rest, water and unloading where regulations require. See Heat Stress in Pigs: Signs, Prevention and Cooling Methods and Winter Pig Care: Keeping Pigs Warm, Dry and Healthy in Cold Weather.
Handling at arrival and lairage
At the plant, unloading should be gentle, with suitable ramps and enough time. Sows that arrive tired or unwell require special handling, and ideally a quiet area to recover. Lairage should provide shelter, water and space; see Lairage Welfare at Slaughter and Animal Welfare Audits at Slaughter. Animals that become non-ambulatory during transport should be handled and euthanized according to regulations and not dragged. Packers and auditors track these cases.
Records and continuous improvement
Record the number of sows shipped, the condition of each, losses and non-ambulatory animals on arrival, and compare across loads. Share feedback with your veterinarian, trucker and packer. Identify patterns, such as particular farms, rooms or seasons associated with higher problems, and adjust culling, handling and loading. Industry programs offer training and benchmarks; see Stockmanship Certification: What It Covers.
FAQ
Can a lame sow be shipped to slaughter?
Only if she is fit to travel under regulations and buyer rules; severely lame or non-ambulatory sows should be treated or euthanized, not shipped. Check requirements.
Why are cull sows more at risk than market hogs?
They are larger, often thinner, more likely to be lame and have been through many cycles of production.
Does feed withdrawal help?
Appropriate withdrawal can reduce stress and losses, but timing depends on journey length and program rules. Ask your veterinarian.