SwineFarming.org

Home › Articles › Swine Behavior & Welfare › Aggression at Mixing: Mitigation Strategies

Swine Behavior & Welfare

Aggression at Mixing: Mitigation Strategies

When unfamiliar pigs are put together they fight, and the fights are fastest and fiercest in the first hours. This article explains why mixing triggers aggression, what it costs in injuries and performance, and which practical strategies reduce it. It covers weaned pigs, finishers, gilts and sows, with an emphasis on measures that are cheap, evidence-informed and humane. Mixing cannot be eliminated in modern production, but it can be done in ways that produce fewer wounds and less stress.

Why mixing causes fighting

Pigs decide dominance relationships by contest. When strangers meet, each pig tests the other, and the fight continues until one signals defeat. Because every pig must establish a relationship with every other pig, the number of contests grows quickly with group size. Most serious fighting happens within the first 24 hours and then subsides, although low-level aggression can persist for a few days.

Fights have real costs. Injuries include face and ear lacerations, shoulder and vulva bites in sows and lameness from slipping. Pigs also eat and drink less in the first day, and growth can lag. Mixing sows soon after breeding is particularly risky, because stress can interfere with embryo implantation in early gestation.

Factors that raise the risk

Aggression is not equal across all mixing events. Higher risk occurs with:

  • Unequal body weights: a large pig meeting a small one pushes the contest.
  • Large groups: more strangers means more contests.
  • Crowding: pigs cannot move away from aggressors.
  • Hunger or competition at feeders: feeding amplifies conflict.
  • Slippery floors: falls make injuries more likely.
  • Stressful transport or heat: tired, hot pigs are more reactive.

Genetics, boar exposure and prior social experience also play a part, but management factors are the main levers available to producers.

Pre-mixing planning

Good mixing starts before pigs meet. A short checklist:

  1. Sort by size and sex so pigs in a pen are similar in weight.
  2. Mix as few pigs as practical: keep litters or pens together when you can.
  3. Prepare the pen: clean, dry, non-slip floors, working feeders and waterers.
  4. Mix when you can monitor: earlier in the day, so you can watch the first hours.
  5. Avoid mixing sick or injured pigs.

For weaned pigs, mixing at weaning along with moving and diet change stacks stressors. Some producers keep litters intact through the nursery, a approach that reduces fighting but may limit flexibility. See Weaning Stress: Behavioral Indicators for related effects.

Practical strategies during mixing

Several techniques help disperse aggression:

  • Space and escape: give pigs room to retreat. Even a few extra square feet per pig lowers injury rates.
  • Barriers: hanging boards, partitions or a protected corner break lines of sight.
  • Enrichment and straw: chopped straw or other material gives pigs something else to do and a surer footing. See Enrichment Pointers: What Works and What Doesn’t.
  • Feed on the floor: scattering feed in the pen reduces competition at a single point, especially for sows.
  • Familiarization: letting pigs see, hear and smell each other through a fence for a day or two before mixing may reduce fighting in some systems.
  • Mixing in a neutral pen: a new space makes it harder for residents to defend territory.

Breeding herds benefit from allowing sows to mix in larger dynamic groups or electronic feeding systems with ample space, though these systems require good design and management. See Sow Group Mixing: Timing and Aggression Management.

What not to do

Some practices have been used traditionally but are poor welfare practice or unsupported by evidence. Avoid:

  • Using sedatives or masking agents without veterinary direction. Rules and approved products vary; follow the label and your veterinarian.
  • Spraying pigs with strong-smelling substances. Results are inconsistent, and some substances irritate the skin.
  • Intervening in fights with your hands. Use a sorting board or panel to separate pigs, never put your body between them.
  • Mixing pigs at the end of a long, hot journey when they are tired and dehydrated.

Monitoring and when to intervene

Stay with newly mixed pigs for the first hour or two and check again several times over the first day. Mild pushing and head knocking are expected. Intervene if you see:

  1. Prolonged fighting between the same pigs without resolution.
  2. Bleeding wounds or a pig unable to rise.
  3. A pig cornered and unable to escape.
  4. Pigs that refuse to eat or drink for many hours.

Separate injured animals to a hospital pen, treat wounds as directed by your veterinarian and record cases. Refer to Social Hierarchy in Pigs: Formation and Stability for how groups settle after the first day.

Measuring success

Count scratches and wounds at 24 to 72 hours after mixing, using a simple scoring system for the face, ears and body. Track lame pigs, culls and growth over the following weeks. If injury scores are high or repeated, review stocking density, group size, weight variation, floor traction and feeding space rather than assuming the pigs are simply aggressive. Audit tools described in Animal Welfare Audits: What Inspectors Look For often include injury scoring.

FAQ

How long does fighting last after mixing pigs?

The most intense fighting usually occurs in the first few hours and mostly settles within 24 to 48 hours, though low-level aggression may continue for several days.

Does adding straw really reduce aggression?

Straw and other rootable material can reduce injuries by giving pigs an alternative activity and better footing, although it is not a substitute for adequate space.

Should I mix sows right after breeding?

Many producers avoid mixing during the first weeks after insemination because of embryo loss risk, instead mixing before breeding or after pregnancy is established. Follow your veterinarian's advice for your system.

Keep learning

Browse all 700 guides →