Light influences pig behavior, feed intake, reproduction and caretaker ability to see problems. A lighting program describes how bright the barn is, for how many hours and in which spectrum. This article reviews practical light intensity and duration for each stage of production, from breeding sows to finishing pigs, and covers lighting for inspection, safety and energy savings. Typical values are given as ranges, and requirements can vary by buyer program or regulation, so confirm those before designing a system.
Why light matters for pigs
Pigs are active mostly during daylight hours. Light helps weaned pigs find feed and water, supports normal behavior and in sows influences reproductive hormones, particularly through day length and melatonin. Caretakers also need enough light to see sick or injured pigs, check feeders and work safely.
Pigs do not require extremely bright light, but constant dim or dark conditions can reduce activity and stress welfare.
Lighting for breeding and gestating sows
Longer day length of about 14 to 16 hours of light a day, with moderate intensity of around 15 to 50 foot-candles at the sow's eye level, is often used in breeding and gestation areas to support estrus expression and conception. Short days, as in winter, are linked with delayed return to heat in some herds.
Boar areas are lit similarly. Research and farm experience suggest benefits are modest but real in barns without windows. See Heat Detection in Sows and Gilts: Signs, Timing and Rebreeding and Weaning-to-Estrus Interval: Management Targets for why lighting may affect rebreeding.
Lighting for farrowing and lactation
Farrowing rooms need good light for the first days, so staff can see piglets, assist deliveries and check sows around the clock, but a dimmer environment at night helps sows rest. Many farms use around 12 to 16 hours of light, with higher intensity during work periods, and a low night light for observation. Keep light levels in the creep area suitable for heat sources, see Heat Mat vs. Heat Lamp for Piglets: Energy and Welfare.
Lighting for nursery and growing pigs
Newly weaned pigs benefit from longer day length and brighter light in the first days to help them find feed and water. Many managers use 16 or more hours of light for the first week, then settle to 12 to 16 hours. Intensity of about 10 to 20 foot-candles is common for nursery pigs, with some barns higher during working hours.
Provide at least a few hours of darkness in each day for growing and finishing pigs so they have a regular rest cycle. Constant 24-hour light is not recommended for normal rearing.
Duration and intensity summary
| Stage | Light hours per day | Intensity (approx.) |
|---|---|---|
| Breeding and gestation | 14 to 16 | 15 to 50 foot-candles |
| Farrowing | 12 to 16 | 10 to 20, with night light |
| Nursery | 12 to 16, longer at start | 10 to 20 |
| Grow-finish | 8 to 16 | 5 to 10, higher for work |
These are guides, and local buyer programs may specify minimum hours or intensity. Check requirements for your market and region.
Natural versus artificial light
Windows, curtains and skylights bring natural light and daily cycles, but they also add heat gain and uneven brightness. Windowless barns rely entirely on lights. In curtain-sided barns, natural light is abundant, see Curtain Systems: Maintenance and Automation. Where possible, combine natural light for day length with artificial lighting for control. Use timers or controllers, and adjust through the seasons.
Fixtures and efficiency
LED lighting is now common because it uses less electricity, lasts long and produces less heat than older bulbs. Choose fixtures rated for wet, dusty, corrosive barn environments, and place them to give even light with few shadows. Clean fixtures regularly since dust reduces output. Dimmable LEDs allow flexible programs and low night lighting. Compare cost against savings over the fixture life.
Practical tips
Measure light with a light meter at pig eye level to check intensity. Light the walkways for safety and inspections, and keep emergency lighting for power failures. Avoid sudden changes, such as lights switched on at full brightness at night, which startle pigs. Record any behavioral or reproductive changes after changing lighting so you can see whether it helps your herd. Consult your veterinarian and local rules for specific programs.
Lighting for boars and replacement gilts
Boars and replacement gilts are easy to forget in a lighting plan. Gilts approaching breeding age respond to day length and to contact with a boar, so many farms keep the gilt development area on a long-day program similar to the breeding barn and give gilts a consistent, bright working area for heat checks. Boars kept in dim, short-day rooms often show lower libido and poorer semen quality in some seasons, so keep boar pens on the same long-day schedule as the sows they serve. Avoid abrupt changes in photoperiod when moving animals between buildings, because the shift can delay estrus or reduce boar interest for a week or more. See Sow Longevity: Genetic and Management Factors for how early management shapes the productive life of a sow.
FAQ
How many hours of light do pigs need?
Most programs give around 12 to 16 hours of light per day, with dimmer or dark periods for rest, but requirements vary by stage and buyer program.
Does lighting affect sow fertility?
Longer day length is associated with better estrus expression and rebreeding in some herds, especially in barns without natural light.
Are LED lights good for pig barns?
Yes, if they are rated for wet, dusty conditions. They save energy, last long and can be dimmed.