SwineFarming.org

Home › Articles › Wild Hogs & Feral Swine › Feral Swine Proof Fencing: Design and Cost

Wild Hogs & Feral Swine

Feral Swine Proof Fencing: Design and Cost

A fence that holds domestic pigs may fail completely against a feral hog or wild boar. Wild animals are stronger, more motivated and willing to root under, push through or climb over barriers that would stop livestock. Yet where the goal is exclusion, such as protecting a crop field, a wildlife feeding station, a restoration site or a farm's biosecurity perimeter, fencing is among the few tools that works day after day. This article covers design principles, materials, installation, costs and maintenance, with a reminder that local codes and wildlife regulations vary.

What pigs do to fences

Feral pigs test barriers three ways. They root under, using the snout to lift loose wire or dig a trench. They push through, hitting weak points with body weight, and sows with piglets or boars can be surprisingly forceful. They climb or squeeze, using terrain, drainage gaps and fallen branches. A fence must remove each option, which is why simple livestock wire often fails.

Typical weak points include creek crossings, gate bottoms, corners, uneven ground and places where posts have rotted. Most failures begin at ground level, not in the upper wires.

Core design principles

  • Stay tight to the ground. Gaps are the usual entry.
  • Use strong, close-spaced posts. Pigs push on the weakest panel.
  • Add height appropriate to your risk. Many designs use around 3 to 4 feet, higher where deer or climbing animals are also issues.
  • Block under-fence digging. Use a buried apron, a rail, or an electric wire near the ground.
  • Close every gap. Gates, culverts and drainage lines count.

Common fence types compared

TypeStrengthsWeaknesses
Woven wire with small openingsDurable, blocks pigletsCostly, can be rooted under
Hog panels on postsRigid, quick for small areasExpensive per mile, gaps at joins
Welded wire with buried skirtStrong against rootingLabor heavy to install
Electric-onlyCheaper, flexibleNeeds power, constant upkeep
Hybrid woven plus electricMost reliableHighest total cost

For the electric option in depth, see Electric Fencing for Wild Pig Exclusion.

Installing a woven-wire exclusion fence

  1. Clear the line of brush so you can see and maintain it.
  2. Set strong corner and brace assemblies, which carry most of the wire tension.
  3. Install line posts at close spacing, often tighter than for cattle.
  4. Hang woven wire with small bottom openings and attach it so the bottom edge sits at ground level.
  5. Add a skirt or toe: bend the bottom outward and stake or bury it, or lay a rail along the base.
  6. Fit gates with minimal gaps and a bottom guard.
  7. Walk the line after the first heavy rain and repair washouts.

Terrain changes the plan. In low spots, wire may need to be stretched across with extra anchors or replaced with a hanging grate.

Costs: what drives the budget

Materials, labor, terrain, soil type, brush clearing and distance all matter more than any single per-foot number. Hog panels and woven wire fences cost more than electric designs, and rocky ground raises post costs. Because prices shift with steel markets and regions, get local quotes and ask extension about cost-share programs. Counting the cost of crop loss avoided helps decide where a fence pays back; see Feral Hog Damage to Agriculture: Economic Estimates for damage economics.

Protecting livestock operations

For farms, exclusion fencing is part of biosecurity. Feral swine can carry diseases that threaten commercial pigs, and prevention of contact is the goal. Double fencing or maintaining a clear zone around outdoor pig lots is common practice. Review Pig Fencing: Electric, Hog Panel and Permanent Designs That Hold for standard pig containment, Swine Biosecurity Plan: A Practical Template for Any Pig Farm for where fencing fits, and Feral Swine: Disease Risks, Damage and What Pig Farmers Should Do for disease concerns.

Maintenance routine

A fence is only as good as its last inspection. Check after storms, flood events and in dry seasons when pigs search for food. Look for rooting, sagging wire, fallen limbs and rust. Fix small breaches the same day, because pigs quickly learn and return to the same weak spot. Trim vegetation under electric wires, and keep records of repairs so patterns reveal weak sections.

Exclusion versus removal

Fencing does not remove pigs already inside. If a fenced area contains animals, trap or remove them first, or you may seal them in with your crop. Many managers combine perimeter fencing with trapping, covered in Feral Hog Trapping: Corral vs. Box Traps.

Local rules and wildlife

Fence height, gates and electric charger standards may be regulated by county or state, and fences can block other wildlife, including deer movement and corridors. Consider landowner agreements and consult your wildlife agency, especially near public land. See Wildlife Corridors and Feral Pig Movement for the corridor side of this question.

FAQ

How high should a feral hog fence be?

Height matters less than staying tight to the ground. Many designs use roughly 3 to 4 feet, but confirm what suits your situation and local rules.

Will a regular cattle fence stop feral pigs?

Usually not. Wide wire spacing and gaps at ground level let pigs push under or through, so livestock fences need modification.

Is exclusion fencing worth the cost?

It can be for high-value crops, biosecurity perimeters and restoration sites, particularly when combined with trapping. Get local quotes and check for cost-share programs.

Keep learning

Browse all 700 guides →