SwineFarming.org

Home › Articles › Housing & Environment › Pig Fencing: Electric, Hog Panel and Permanent Designs That Hold

Housing & Environment

Pig Fencing: Electric, Hog Panel and Permanent Designs That Hold

Pigs are strong, curious and persistent, and a fence that holds cattle often fails against pigs. They root under wires, lean on panels, squeeze through gaps and test every corner. A good pig fence combines physical strength with a psychological barrier: an electric shock that pigs learn to respect. This guide explains the main options and how to build each one so that pigs stay where you want them.

Principles of pig fencing

Pigs respect a fence they have learned to fear. Training is therefore part of the design. Introduce new pigs to electric fencing in a small, strongly fenced training pen where they touch the hot wire with their moist noses and learn to back away. Keep the lowest wire close to the ground, because pigs root under fences. Make sure the fence stays hot at all times; one day of dead wire teaches pigs that the fence is empty.

Electric fencing

For pasture pigs, electric fencing is the standard. Common designs use two to three strands of high-tensile wire or polywire, with the first strand about 4 to 6 inches above ground for small pigs and the second at 10 to 12 inches. Larger pigs and sows are controlled with lower strands about 6 and 12 inches and sometimes a third at 18 to 24 inches. Electric netting designed for sheep and pigs can be moved easily but wears with heavy use.

Key components:

  • Energizer: choose one rated for the length of fence and vegetation load, with enough joules to maintain voltage across the fence, preferably 4,000 to 5,000 volts or more at the far end. Low-impedance energizers are best for weedy pastures.
  • Grounding: the most common failure. Use several ground rods several feet deep, spaced about 10 feet apart, in moist soil, and connect with heavy wire. Dry soil requires more rods.
  • Insulators and posts: use quality insulators on wood, steel or fiberglass posts, with corner and end posts braced.
  • Voltage tester: check fence voltage weekly with a tester and walk the line to remove vegetation and fix breaks.

Hog panels and woven wire

Cattle or hog panels, made of welded steel rods, are strong and make good pens, loading chutes and farrowing pens. Panels about 34 inches tall and 16 feet long are common. Wire the panels to steel posts every few feet and add a wire at the ground or bury the bottom to stop rooting. Woven wire fence with small mesh openings at the bottom, topped with a hot wire along the inside at nose height, makes a durable perimeter. Barbed wire can injure pigs and is not recommended for small pigs.

Permanent perimeter fences

For permanent paddocks near roads or neighbors, build a perimeter of woven wire or sturdy panels with a hot wire inside, and corner posts set deep in concrete or tamped soil. A double fence with a gap between two fences prevents nose-to-nose contact between your pigs and neighbors' swine or feral swine, which supports biosecurity; see Feral Swine: Disease Risks, Damage and What Pig Farmers Should Do and Swine Biosecurity Plan: A Practical Template for Any Pig Farm.

Gates and corners

Gates are weak points because pigs push on hinges and latches. Use strong gates with latches that pigs cannot lift, and set gate posts firmly. In corners, pigs crowd and push, so brace posts and add extra wire. Use gate latches that can be operated with gloves in all weather.

Training new pigs

Place new pigs in a small pen with panels and a hot wire at nose level for the first few days. Give them feed and water inside so they stay calm. Once pigs have learned the fence, move them into the larger paddock. Do not turn out untrained pigs into a large paddock with only a single strand of electric fence.

Maintenance routine

  1. Check voltage weekly and after storms.
  2. Keep grass and weeds from touching hot wires.
  3. Inspect gates, hinges and latches.
  4. Repair gaps where pigs have rooted.
  5. Replace worn insulators and broken wires immediately.
  6. Keep a spare energizer and tools on hand.

Cost-saving ideas

Reusing steel posts and panels saves money, but check for sharp edges and rust. Portable polywire and step-in posts allow rotational grazing without building permanent fences, a good fit for paddock systems in Pasture Pigs: Forage, Rotation and Feeding Outdoors and How Many Pigs Per Acre? Space, Pasture and Housing Math. Buy a strong energizer and good grounding rather than skimping on those, as they determine how well the fence works.

Fences and the law

Some states and counties require fencing standards for livestock and make owners liable for damage or accidents caused by escaped animals. Pigs on roads are dangerous to drivers. Check local laws and keep liability insurance; see Pig Farming Laws and Zoning: What to Check Before You Buy Pigs and Swine Insurance and Risk Management: Liability, Property, Price and Disease.

Troubleshooting a fence that does not shock

If the fence is not hot, begin at the energizer. Check the power source, the fuse and the ground connection. Disconnect the fence from the energizer and test the output; if it is good, reconnect and walk the fence with a tester to find the point where voltage drops. Common causes are vegetation on the wire, a broken insulator, a wire touching a metal post, corroded splices and a fence that is too long for the energizer. Fix the problem right away, because a short in the fence may let pigs escape in hours.

Fence safety for people

Electric fence energizers sold for livestock are designed to deliver a short pulse that is unpleasant but not harmful. Always use a certified energizer rather than a homemade one, and keep fences away from metal buildings and public paths. Post warning signs along public roads and on gates, and teach children and visitors to stay clear.

FAQ

How many wires do you need for pig fencing?

Two or three strands of electric wire at nose height are standard for trained pigs, with the lowest wire about 6 inches from the ground.

Will an electric fence hold pigs?

Yes, once they have been trained to it and the fence has strong voltage and good grounding.

What stops pigs from rooting under a fence?

A low hot wire, a buried or wired-down bottom panel edge or a ring in the nose, although rings are controversial and sometimes restricted.

Keep learning

Browse all 700 guides →