Deep bedding systems house pigs on a thick, absorbent pack of straw, corn stalks, wood shavings or similar material that is topped up rather than cleaned out daily. Done well, the pack stays dry on top, composts below, keeps pigs warm and gives them material to root. Done poorly, it turns wet, smelly and unhealthy. This article explains how the pack works, how to choose a carbon source, how much to use, how to manage moisture and what to do with the material afterward.
How the pack works
Bedding absorbs urine and manure, and microbes break down the mix. As carbon-rich material meets nitrogen-rich manure, the lower layers can heat, giving some warmth, particularly in cold weather. The surface should remain dry enough for pigs to lie on comfortably.
The key balance is carbon, moisture and oxygen. Too little bedding leaves the surface wet. Too much moisture drives the pack anaerobic and increases ammonia. Pigs themselves help, because rooting and trampling mix and aerate it. Systems of this type are used in Hoop Barns for Swine: Feasibility and Management and in some converted buildings. For the welfare aspects of bedding see Straw Bedding: Welfare and Practicality.
Choosing a carbon source
| Material | Strengths | Limits |
|---|---|---|
| Wheat or oat straw | Absorbent, edible, pigs enjoy it | Cost and supply vary |
| Corn stalks or cobs | Cheap in grain areas | Less absorbent, can be dusty |
| Wood shavings | Absorbent, low dust if screened | Less enrichment, may be costly |
| Sawdust | Very absorbent, cheap | Fine, can be dusty or heat |
| Soybean stalks, hay | Locally available | Often mold risk |
| Cover crop residue | Local, low cost | Variable quality |
Choose clean, dry, mold-free material, and never use treated wood or lumber with preservatives. Chopped straw packs more tightly and absorbs more, but long straw gives more rooting enjoyment. Think about your manure plan, since the finished material must be spread or composted.
How much bedding to use
Amounts depend on pig size, stocking density, season, ventilation and bedding type. Typical systems use substantial volumes per pig through a grow-finish cycle, often several hundred pounds of straw per pig in total, though numbers vary widely. Do not rely on a fixed number. Use observation.
Check that the surface feels dry when you kneel on it. Add fresh bedding when it becomes damp or when pigs look dirty. In winter, you may add more to insulate. Make sure bedding supply is secure before starting, since running out forces emergency measures.
Managing moisture and dunging
Pigs usually choose a dunging area, often the wettest or coolest part. Place waterers and feeders at the edge or on a concrete apron so spills do not soak the pack. Encourage a dunging zone by managing temperature and layout, with the cooler area near the apron.
Check for wet patches and remove or cover them. Good ventilation removes moisture, so see Swine Barn Ventilation: Air, Temperature and Humidity Basics. Avoid overstocking, as extra pigs overload the pack. In hot weather pigs may soil the whole pack to cool off, so provide wallows or cooling elsewhere, see Heat Stress Alleviation: Drip vs. Misting Systems.
Pack temperature and health
A composting pack may warm to moderate temperatures, particularly when deep, but warmth varies. Pigs lie where they are comfortable, and heat can be a benefit in winter and a nuisance in summer. Monitor pack temperature with a long thermometer if you want to track biology.
Health issues include respiratory irritation from dust or ammonia, parasites that persist in bedding and lameness if the pack is uneven or wet. Remove bedding between groups where your veterinarian recommends, and follow biosecurity when bringing in bedding, since straw can carry pathogens. See Swine Biosecurity Plan: A Practical Template for Any Pig Farm and Air Quality Monitoring: Ammonia and Dust Thresholds.
Cleaning out and composting
When the pack is removed, you have a bulky mix of bedding and manure that is a valuable soil amendment. Options include:
- Direct spreading on fields at agronomic rates under your nutrient plan.
- Stockpiling and composting, which stabilizes nutrients and reduces pathogens.
- Selling or sharing finished compost, where rules allow.
Test the material for nutrient content, and follow setbacks and timing rules. Cover stockpiles and control runoff, as in Swine Manure Management: Storage, Handling, Application and Safety. Compared with liquid systems, handling solids needs equipment such as a loader and spreader.
Costs and labor
Costs include bedding purchase, storage space, loader time, spreading and cleanout. Labor is spread across frequent small additions and occasional large cleanouts. Bedding cost is often the dominant expense, so compare prices and shop early. Storing bedding under cover prevents spoilage.
Weigh costs against benefits such as lower building cost, manure nutrient value, welfare and market premiums. Check whether your market recognizes bedded systems, and keep records of cost per pig.
Common mistakes
- Starting with too little bedding depth.
- Using damp or moldy material.
- Locating waterers over the pack.
- Overstocking pens.
- Neglecting ventilation, leaving moisture and ammonia high.
- Failing to plan manure handling and bedding storage.
- Not keeping records of added bedding and pack condition.
Learn from experienced producers and extension specialists, and start with one pen to refine routines before scaling.
FAQ
How deep should deep bedding be?
There is no single depth, but the pack should be thick enough that the surface stays dry and comfortable, with more added in cold weather or when it dampens.
What is the cheapest bedding for pigs?
It depends on your area, but corn stalks, locally baled straw or sawdust are often cheapest, so compare cost per unit of absorbency, not just price.
Does a deep bedding pack smell?
A well-managed dry pack has a mild earthy odor, while a wet, overloaded pack produces strong ammonia, so keep it dry and ventilated.