Walk into any sale barn and you will hear buyers throw around letters like EPD, BF and LEA as if everyone was born knowing them. They are simply numbers that predict how a pig's offspring will perform compared with the breed average. For junior exhibitors, understanding them helps you pick a gilt that can raise a better pig, or a barrow from a family of consistent performers. This guide explains what EPDs mean, what performance data can and cannot tell you, and how to use the numbers without ignoring the animal standing in front of you.
What an EPD Actually Is
EPD stands for expected progeny difference. It is a prediction of how much better or worse a parent's future offspring should perform than the offspring of an average animal in the same breed database. The number is expressed in the unit of the trait, such as pounds, inches or days, and can be positive or negative.
Here is the key idea: an EPD compares parents, not pigs. A boar with a litter size EPD of +0.5 is expected to sire daughters that farrow about half a pig more per litter than daughters of an average boar. It does not promise anything about one individual show pig. Think of it as the odds, not the result. Higher accuracy values mean more data stand behind the prediction, so treat numbers on young, lightly tested animals with caution.
Common Traits You Will See
Breed associations publish different traits, but a handful appear again and again. Check the registry's own glossary because abbreviations vary.
| Trait | What it tells you |
|---|---|
| Number born alive | Litter size potential in daughters |
| 21-day litter weight | Milking ability and mothering |
| Days to 250 lb | Growth rate, lower is faster |
| Backfat | Fat thickness over the loin |
| Loin eye area | Muscle size, larger is better |
| Terminal or maternal index | A combined score weighted for a purpose |
For show projects, loin eye area, backfat and growth matter most in a market pig. Litter size and milk matter most if you plan to keep a gilt for breeding.
Reading a Pedigree Page
Most registries list the sire, dam, grandparents and an EPD row for each animal that has data. Start with the individual, then the sire and dam, because the average of the parents tells you where the pig's genetics are headed. Look for patterns across several generations rather than one lucky number.
A useful habit is to circle two traits you care about and ignore the rest at first. Compare three candidates side by side on only those two, then bring in structure and appearance. If a pig has no EPDs at all, that is not automatically bad, since many show pigs come from crossbred or unregistered sows. It just means you rely more on the parents' records and your eye.
Performance Data Versus EPDs
Performance data are the raw measurements taken on an actual pig: birth weight, weaning weight, ultrasound backfat and loin eye at a given age. EPDs blend those measurements with relatives' records and adjust for the herd and environment, which makes them fairer across farms.
Raw numbers can mislead. A pig that weighs more at 90 days may simply have been raised in a cooler pen or fed better than its litter mates. Ask whether the breeder adjusts for age and litter size. Ultrasound is a snapshot and the operator matters, so compare numbers from the same technician when possible. When both EPDs and raw data point the same direction, you can trust them more.
Where the Numbers Fall Short
Show ring success depends on traits that EPDs barely measure. Eye appeal, soundness, balance, hair coat and disposition do not appear on a pedigree page, yet judges reward them heavily. Structural correctness especially deserves your own inspection, as covered in evaluating pig structure.
Another limit is that EPDs are based on commercial-style data in many breeds, so a high muscle number does not guarantee a pig that will look good at 270 pounds under show lights. Finally, selection indexes can hide a weak trait inside a good total. Always read the individual traits behind a combined score.
Using Data Alongside Your Eye
A practical decision order works well for families. First, eliminate pigs with structural problems or poor health, since no EPD can fix a bad foot. Second, rank the survivors by the two or three traits that fit your goal. Third, choose the one you can handle at your skill level and budget.
Pair this with the checklist in how to select a show pig and the buying tips in reading a sale catalog. If two pigs are close, pick the one with better feet and a calmer attitude. A sound pig that stays healthy through the summer will beat a spectacular pig that goes lame in July.
Questions to Ask the Seller About the Data
Breeders who track data are usually proud to talk about it. Useful questions include:
- Were these figures measured on this pig or estimated from relatives?
- How old was the pig when it was scanned?
- How many pigs were in the contemporary group?
- Is the herd enrolled in a national evaluation program?
- Can I see the sire's and dam's own records?
Vague answers are a signal to lean harder on your own inspection. For more on vetting a seller, see what to ask a breeder before you buy.
Mistakes Families Make With EPDs
- Chasing the single highest number in one trait and ignoring balance.
- Comparing EPDs across different breeds, which use separate bases and cannot be matched.
- Assuming a show pig must have registered parents to be competitive.
- Paying a big premium for data on a pig that has weak feet or an unsettled temperament.
- Forgetting that your feeding, housing and health program influence the result as much as genetics.
Genetics sets the ceiling, but daily care decides how close you come to it.
FAQ
Do I need EPDs to win at a county fair?
No. Many champions come from unregistered or crossbred sows. EPDs help you make informed choices, but structure, muscle shape, condition and good feeding matter more in the ring.
Can I compare EPDs from two different breeds?
No. Each breed association calculates EPDs against its own breed average, so a +1.0 in one breed is not equal to a +1.0 in another. Compare pigs only within the same evaluation.
Is a higher EPD always better?
Not always. Lower is better for traits like days to market weight and sometimes backfat, and an extreme value in one trait can come with trade-offs elsewhere. Match the numbers to your goal.