Color is the first thing shoppers judge in fresh pork, and it predicts a good deal about water-holding capacity, pH and eating quality. Processors and researchers measure it visually with standards and instrumentally with colorimeters and spectrophotometers. Each approach has strengths and traps. This article explains the L*, a* and b* color system, how to compare instruments with visual scoring, how to take consistent measurements, and what the numbers can and cannot tell you about quality.
Why Color Matters in Pork
Consumers read pale pork as watery and dark pork as old or tough, even though neither assumption is always true. Color relates to myoglobin content, its chemical state, and the structure of the muscle surface, which scatters light. Color also reflects the pH decline after slaughter. Fast pH decline at high temperature produces pale, soft, exudative meat, while high ultimate pH produces dark, firm, dry meat. See PSE Pork: Causes and Prevention and DFD Pork: Handling and Utilization.
Because color is quick to assess on the line, it is a front-line quality indicator that also supports grading and sorting.
Visual Scoring
Visual methods rely on standards. The National Pork Board color standard uses a scale of 1 to 6, with lower numbers pale and higher numbers dark, and a score near 3 considered the target for fresh loin in many programs. Japanese color scales exist for similar use. Laminated cards or photo standards are held next to the cut surface under controlled lighting.
Visual scoring is cheap and fast, but results vary between people, and lighting changes perception. Training, regular calibration among assessors and consistent viewing conditions improve reliability. Marbling and firmness are often scored with companion standards.
Instrumental Measurement and the CIE System
Instruments quantify color in the CIE L*a*b* space:
- L*: lightness, from 0 black to 100 white, higher in pale pork
- a*: red-green axis, higher means redder
- b*: yellow-blue axis, higher means more yellow
Hue and chroma can be calculated from a* and b* to describe color tone and saturation.
Handheld colorimeters and spectrophotometers read a small surface area. Pale pork often shows L* values above the mid-50s, while dark pork shows lower L* values, but cutoffs differ by instrument and muscle, so each program should set its own thresholds from reference data.
Instruments Compared
| Feature | Visual scoring | Colorimeter | Spectrophotometer |
|---|---|---|---|
| Cost | Very low | Moderate | Higher |
| Speed | Fast | Fast | Fast to moderate |
| Objectivity | Variable | High | High |
| Detail | Single score | L*a*b* | Full reflectance spectra and L*a*b* |
| Sensitive to light setup | Yes | Controlled by device | Controlled by device |
Use the same instrument model and settings for comparisons, because values differ between devices. Report illuminant, observer angle and aperture size, since these change the numbers.
Measurement Technique
Most errors come from technique rather than equipment. To get reliable readings:
- Cut a fresh surface and let it bloom for a consistent time, often 30 minutes or more, as oxygen converts myoglobin to bright oxymyoglobin
- Measure at the same site on the same muscle, typically the loin eye at the 10th rib, or a standard location
- Avoid fat, connective tissue and blood spots
- Place the instrument flat with no light leaks
- Take several readings and average them
- Calibrate with white and black standards each session
Temperature affects results, so measure at a consistent meat temperature.
Packaging and Time Effects
Color changes during storage and display. Overwrap, vacuum and modified atmosphere packages give different appearances. Vacuum packs look darker and purplish because of deoxymyoglobin, which blooms red after opening. Long exposure to light and oxygen produces brown metmyoglobin. See Modified Atmosphere Packaging for Fresh Pork for how gases influence color.
Researchers also track color stability, the retention of redness over days, because a stable color increases shelf life and reduces markdowns. Feeding and genetics, including vitamin E supplementation, can improve stability, as in Meat Quality Genetics: Drip Loss and Color Traits.
Linking Color to Other Quality Traits
Color alone does not diagnose quality, but combined with ultimate pH and drip loss it gives a stronger picture. Pale, high-L* meat usually has lower water-holding capacity and higher drip loss, covered in Water-Holding Capacity: Genetic and Processing Factors. Dark meat has high pH and good water binding, yet it spoils faster in vacuum packs.
Many plants combine pH measured a day or so after slaughter with color scoring to sort loins into categories for different uses, such as fresh retail, marinated products or further processing. This also supports Pork Carcass Grading: USDA Standards and Beyond.
Choosing a Method
For a small shop, a visual standard plus a consistent habit of examining loins under good light may be enough. For a plant that sorts product or negotiates quality specifications with buyers, instrumental readings add objectivity. Researchers need instruments and documentation of settings. Whatever you choose, write down the protocol, train staff and verify with periodic cross-checks. Resources are available from the National Pork Board.
FAQ
What do L*, a* and b* mean?
L* is lightness, a* is the red to green axis and b* is the yellow to blue axis, together describing the color of the meat surface.
Is dark pork always poor quality?
Not necessarily. Dark, firm meat binds water well, but very dark meat with high pH can spoil faster in vacuum packaging and may be less appealing to shoppers.
Why do readings differ between instruments?
Instruments differ in illuminant, aperture and optics, so compare values only from the same model and settings and set your own thresholds.