SwineFarming.org

Home › Articles › Swine Housing Deep Dives › Manure Storage Lagoons: Liners and Monitoring

Swine Housing Deep Dives

Manure Storage Lagoons: Liners and Monitoring

An earthen manure storage lagoon holds liquid swine waste until it can be applied to crops, and for many farms it is the cheapest way to store large volumes safely. But a lagoon is a structure with real failure risks. Its liner, depth, freeboard and monitoring determine whether it protects groundwater and neighbors or becomes a liability. This article explains how lagoons work, what liner options exist, how to size and manage them, which monitoring steps matter and which rules to check with your state regulator.

How a lagoon works

A lagoon receives flushed or pit-drained manure and water, then stores and partly treats it. In a treatment lagoon, anaerobic bacteria digest organic matter, producing gas and a settled sludge layer, while the liquid above is gradually diluted and stabilized. A storage-only pond is simpler, holding manure until application without relying on treatment.

The design intent drives everything else. Treatment lagoons need a minimum volume for biological stability and an additional volume for storage and rainfall. Storage ponds are sized for the period between application windows. For the broader system, including land application, see Swine Manure Management: Storage, Handling, Application and Safety.

Liner options and seepage

All earthen structures seep to some degree, and regulators set limits on acceptable rates. The liner is the main barrier, and the options include:

LinerDescriptionConsiderations
Compacted clayNative or imported clay placed in lifts and compactedNeeds suitable soil, careful moisture control
Bentonite amendedBentonite mixed into soilUseful where clay is scarce
GeomembraneSynthetic sheet, such as HDPELow seepage, needs skilled installation
ConcreteUsed for tanks and pitsHigher cost, cracking risk

Soil investigation before construction is essential. Sands and gravels, fractured rock and shallow water tables raise the risk of contamination, and sinkhole or karst areas may rule out an earthen design altogether. A geotechnical test and a qualified engineer reduce the odds of an expensive surprise. Seepage often decreases over time as manure solids seal the bottom, but you should not rely on that alone.

Sizing and freeboard

Volume must cover manure, flush or wash water, rainfall on the surface, and the design storm, plus sludge accumulation. Freeboard is the vertical margin between the liquid surface and the top of the berm, commonly required at a foot or more by state rules, and it protects against overtopping in heavy rain and wave action. Mark a permanent depth gauge showing maximum operating level and the start of the emergency zone.

Plan the pump-down schedule around your crop calendar. Waiting until a lagoon is nearly full before irrigating in wet weather is a classic way to cause a spill. Keep a log of levels after rain events and before winter freeze, and compare against rainfall records. Check local engineering standards, because sizing methods and design storms differ by state.

Berm construction and maintenance

Embankments should have gentle side slopes, a stable top width wide enough for equipment, and good grass cover that is mowed regularly. Deep-rooted trees and shrubs damage berms by creating channels for seepage, so remove them. Burrowing animals such as muskrats and groundhogs create tunnels that can lead to leaks and failures, so manage them promptly.

Inspect the slopes for cracks, wet spots, slumping, erosion and seepage, particularly after storms. Control inlet and outlet pipes with protection from erosion and scour. Address small problems before they grow, because a failed berm can release large volumes within hours. Keep records of every inspection and repair.

Monitoring and testing

Monitoring has two levels. First, routine visual checks of levels, berm condition and surface appearance. Second, testing that may be required by permit or by your own risk plan:

  • Manure nutrient analysis before each application to set rates for crops.
  • Groundwater monitoring wells downgradient from the structure where required.
  • Sludge depth surveys every few years to track accumulation and plan cleanout.
  • Liquid level and rainfall logs.

A dark pink or purple color is typical of a healthy anaerobic treatment lagoon, while a gray or sudden color change can suggest a problem, such as overloading or toxic input. Wash water from truck bays and disinfectants may upset treatment, so see Truck Wash Bays: Design for Biosecurity Compliance.

Odor and air considerations

Lagoons emit ammonia, hydrogen sulfide and methane, and odor peaks during spring and fall turnover, agitation and after sludge disturbance. Strategies include proper loading, avoiding overload, keeping surface undisturbed and using covers where economics permit. For options and the realistic limits of each, read Swine Odor Control: Practical Ways to Reduce Smell and Neighbor Complaints and Odor Control Additives: Evidence Review.

Never enter or lean over a manure structure without safety training, since gases can kill quickly. Agitation of stored manure releases hydrogen sulfide in pits, and the same hazard applies near pump-out points. Review Safety Training: Confined Space and Slurry for confined-space rules.

Closure, cleanout and emergencies

Sludge accumulates and eventually reduces capacity. Cleanout needs a plan covering agitation, removal, nutrient testing and application timing. Avoid damaging the liner with equipment, especially clay and geomembrane liners. Keep the liner intact, with some sludge left behind where recommended, and re-inspect afterward.

Prepare an emergency action plan before you need it. It should list who to call, how to stop flow, where to build temporary dikes and which regulator to notify. Practice the plan with your crew. If a release occurs, stop the source, contain the flow, and notify the state agency promptly. Fines and cleanup costs are typically much greater than prevention costs.

Alternatives and future-proofing

Some farms are moving to concrete tanks, covered storages or digesters, which can reduce odor and manage nutrients more tightly. Compare costs against the long-term liability of an earthen basin. If you are considering conversion, review Biogas from Swine Manure: Digester Feasibility and Solid-Liquid Separation: Equipment and Economics, which can reduce sludge buildup and lagoon loading.

Whatever the design, set aside funds for maintenance, inspection and eventual closure, and keep your nutrient management plan current.

FAQ

How deep should a manure lagoon be?

Depth depends on design purpose, local engineering standards and soil conditions, so work with a qualified engineer and your state agency rather than using a single number.

Do lagoons need to be lined?

Most states require seepage to stay below a set limit, achieved with compacted clay, amended soil or a synthetic liner, depending on site soils and regulations.

How often should a lagoon be inspected?

Do a quick visual check frequently, ideally weekly, and always after heavy rain, with a more thorough documented inspection on a regular schedule set by your permit or plan.

Keep learning

Browse all 700 guides →