SwineFarming.org

Home › Articles › Business & Markets › Carcass Yield and Hanging Weight: From Live Pig to Pork Chops

Business & Markets

Carcass Yield and Hanging Weight: From Live Pig to Pork Chops

Customers and farmers often misunderstand how much meat comes from a pig. A 280-pound live pig does not give 280 pounds of pork chops. Between the farm and the freezer, the pig loses weight at each step: gut fill, blood, hide, head, feet, organs, bone and trim. Knowing the numbers helps farmers price pork honestly and helps customers order the right amount and cuts. This guide explains the weights and yields.

From live weight to carcass weight

Live weight is the weight of the pig before slaughter. After slaughter, bleeding and removal of the hide or hair, head in some cases, feet, internal organs and sometimes leaf fat, the carcass remains. Hanging weight, also called hot carcass weight or dressed weight, is the weight of the carcass. The ratio of carcass weight to live weight is the dressing percentage. For market hogs, dressing percentage is typically in the range of 72 to 77 percent, depending on fill, breed, fatness and whether the head and leaf fat are included. A 280-pound live pig might have a hanging weight of about 205 to 215 pounds.

From carcass to cuts

Next, the carcass is cut into primals and sub-primals. Cutting yields depend on how much fat and bone are removed and on customer preferences. Typical yields of retail cuts from a carcass are roughly 65 to 75 percent of hanging weight for bone-in cuts, lower for boneless. A 210-pound hanging weight might yield around 140 to 160 pounds of packaged pork, depending on cut selection. The more bone-in cuts, the higher the yield; the more boneless and trimmed, the lower.

Typical cut distribution

PrimalShare of carcass (approximate)Common retail cuts
Ham (leg)20-25%Fresh or cured ham, roasts
Loin20-25%Chops, loin roasts, tenderloin
Belly (side)15-20%Bacon, spare ribs
Shoulder (butt and picnic)20-25%Boston butt, picnic, sausage
Jowl, feet, trim and others5-10%Jowl bacon, sausage, lard

Percentages shift with fatness and the customer's order. Lean pigs yield more lean cuts.

Factors that change yield

  • Fill: a pig with full stomach weighs more live but yields less carcass. Withholding feed for hours before slaughter improves dressing percentage but must be balanced with welfare; follow the processor's instructions.
  • Fatness: fatter pigs produce more trim and lard but lower lean yield.
  • Muscling: heavily muscled pigs yield more meat per carcass.
  • Cutting style: boneless cuts, trimmed fat and removal of skin reduce packaged weight.
  • Curing and smoking: ham and bacon lose moisture, reducing weight.
  • Processor practices: trimming and shrink vary.

Shrink

Shrink includes weight loss from the pig's empty digestive tract, the hide and carcass cooling. Chilling a carcass for a few days also loses a small amount of water. When customers see packaged weights lower than expected, they may think they were cheated unless you explain shrink. Education avoids disputes.

Pricing and examples

Because customers want to know their cost per pound of packaged meat, you can compute it. For a hog with a hanging weight of 210 pounds, if the price is a stated amount per pound of hanging weight and the customer also pays processing fees, the cost per pound of take-home meat is higher than the quoted hanging price because of yield loss. For example, if packaged yield is 150 pounds from 210 pounds hanging weight, the yield is about 71 percent, so cost per take-home pound equals the total cost divided by 150. Provide a worked example in your order forms so that customers can understand, as discussed in Selling Pork Directly to Consumers: Custom-Exempt, Inspected Cuts and Legal Rules.

Ordering a whole or half hog

A customer typically chooses how to cut each primal: chops thick or thin, ham fresh or cured, bacon sliced or slab, sausage seasoned, ribs, hocks and offal. Give them a cut sheet or a simple form. Ask the processor for standard instructions. Advise customers to leave room in the freezer: a whole hog's packaged meat takes roughly 6 to 8 cubic feet. A half hog takes about 3 to 4 cubic feet.

Carcass data for the commercial producer

Packers measure carcass weight, backfat and loin depth to calculate lean percent, then apply grids that pay premiums or discounts; see Hog Prices Explained: Lean Hogs, Cutout, Base Price and What You Get Paid. Producers can use carcass data to adjust genetics, feeding and marketing weight. Compare the data between groups and sires; see Crossbreeding Swine: Hybrid Vigor, Systems and Practical Plans and Lysine and Amino Acids in Swine Diets: A Plain-English Guide.

Judging a pig for yield before slaughter

Look at the pig from behind and from the side. A pig with a wide, muscular rear, well-defined shoulder and moderate fat cover will yield well, while a pig with a sagging belly and heavy jowl will carry more fat. Experience helps; ask a processor to evaluate your pigs after slaughter to learn what the live pig predicted.

A sample cut sheet to start with

If you are ordering your first hog, a common set of instructions is: hams cut as fresh half hams or cured and smoked, loins as chops at about three-quarters of an inch with some roasts, bellies as sliced bacon cured and smoked, shoulders as Boston butt roasts and picnic roasts, spare ribs left whole, trim ground into sausage seasoned to taste, and the fat, jowls and feet either returned or discarded. Specify the package size in pounds or number of chops per package. If you have never ordered before, ask the processor for their standard cut sheet, and adjust it next time after tasting the results.

Quality checks at pickup

Check packages for tight seals, correct labels and frozen solid contents. Look for freezer burn, leaks and any odd odors. Weigh the total order if possible and compare with the processor's invoice. If something is wrong, speak with the processor promptly, as most businesses want to correct errors. Record the results, including how the cuts look and taste, so that you can improve the next order.

FAQ

What is hanging weight?

The weight of the carcass after slaughter and removal of the head, hide or hair, feet and organs, before cutting.

How much meat do I get from a 280-pound pig?

Typically about 140 to 160 pounds of packaged meat, depending on how the cuts are ordered.

What is dressing percentage?

Carcass weight divided by live weight, usually about 72 to 77 percent for market hogs.

Keep learning

Browse all 700 guides →