Pigs do not need a palace, but they do need a dry bed out of the wind and a shade from the sun. Many small farms build simple shelters from salvaged or inexpensive materials that work well if designed correctly. The key is to meet pigs' basic needs: dry floor, protection from wind and rain, good ventilation, enough room and strength to resist pigs rubbing and pushing. This guide describes designs and pitfalls.
What a pig shelter must do
A pig shelter should keep pigs dry, block the prevailing wind, provide shade in summer, hold bedding in winter, resist being tipped over and allow cleaning. It should not trap heat, have sharp edges or splintered wood, or allow pigs to be crushed or caught. It should be easy to move or clean between groups, since cleaning between groups reduces parasites and disease.
Sizing
A rule of thumb is 8 to 12 square feet of floor space per finishing pig in a hut, with more in extreme cold when pigs want to cluster but need to lie down comfortably. A shelter for four market pigs might be about 6 by 8 feet; for sows, farrowing huts are often 6 by 8 feet or larger. Height should allow pigs to stand and you to reach in, typically 3 to 4 feet at the front for small huts and higher for walk-in sheds. Too much volume makes a hut cold; too little makes it crowded and hot.
Simple designs
- A-frame hut: two sloped sides of plywood or metal on a wooden frame, with a door end facing away from the wind. It is easy to build and shed rain.
- Quonset or arch hut: a bent hog panel or steel arch covered with a tarp or plywood, anchored to skids. Lightweight and cheap.
- Lean-to shed: a slanted roof leaning against an existing wall or fence, open to the south in winter. Good for shade and wind protection.
- Pallet or plywood shed: a frame with pallets or plywood walls and metal or plastic roofing. Use only clean, untreated pallets.
- Calf hutches and repurposed structures: plastic calf hutches can work for sows or small groups with added bedding and ventilation.
Materials and safety
Use untreated or farm-safe lumber and avoid wood treated with chemicals that pigs may chew. Cover sharp edges, remove nails and protruding screws and avoid materials that may splinter. Do not use old chemical drums, treated telephone poles or anything that held toxic substances. Make sure the structure is anchored; pigs push on walls and wind can flip light huts. Attach skids so you can drag the hut with a tractor.
Ventilation and insulation
In summer, huts need cross-ventilation through open ends, vents or raised sides so they do not become ovens. Provide shade beyond the hut for hot days; see Heat Stress in Pigs: Signs, Prevention and Cooling Methods. In winter, partially close the doorway with a flap or straw bales and use deep bedding. Insulating the roof with straw bales or reflective material reduces swings in temperature. Avoid sealing so tightly that moisture builds up; see Winter Pig Care: Keeping Pigs Warm, Dry and Healthy in Cold Weather.
Bedding
Provide dry bedding in winter and clean, absorbent bedding in farrowing. Replace wet bedding promptly. Straw is common, but wood shavings and corn stalks also work. Avoid bedding that is dusty or moldy.
Location
Place shelters on well-drained high ground, not in low spots where water pools. Orient doors away from prevailing winds and toward the sun in cold climates. Keep shelters away from fences that pigs can climb, and place feeders and waterers at some distance so that pigs do not foul beds.
Cost-saving strategies
Share materials with neighbors, buy used metal roofing, look for pallets from clean sources and scavenge lumber from demolition sites. Build one shelter and copy it if it works. Spend extra on anchoring, roof strength and ventilation, since a failed shelter costs more than a well-built one. Compare costs using How Much Does It Cost to Start Raising Pigs? Budget Breakdown.
When to move up to a larger structure
As your herd grows, consider a hoop barn or a small insulated building; see Hoop Barns for Swine: Design, Bedding, Costs and Management and Pig Housing Options: Pasture, Hoop Barns, Confinement and More. A shelter that is comfortable for four pigs will not work for forty.
Example build plan for an A-frame hut
A simple A-frame hut for four to six pigs can be built from sheets of exterior plywood or metal roofing on a frame of 2-by-4 lumber. Cut two sides about 6 feet by 4 feet and attach them at the top with a ridge board, leaving the front and back open or covered with a half wall and a door opening of about 2 feet. Fasten skids on the bottom so a tractor can drag the hut. Add small ventilation holes near the peak, screw all edges tight and round off corners. Set the hut on a gravel pad or a few inches of crushed rock to keep the floor dry, then add straw bedding. A well-built hut like this lasts many years with minor repairs.
Shade structures
For hot climates, a shade structure of shade cloth or a metal roof on posts, high enough for air to move beneath, is often more useful than an enclosed hut. Orient the shade to cover pigs during the afternoon sun and keep it away from fences that pigs can climb.
FAQ
What is the cheapest pig shelter?
An A-frame hut or an arched hog-panel hut covered with a tarp and bedded with straw is very economical and easy to move.
How big should a pig shelter be?
About 8 to 12 square feet per finishing pig, enough to lie down without crowding but small enough to hold warmth.
Do pigs need a heated shelter?
Adult pigs generally do not if they have dry bedding and wind protection, but newborn piglets need supplemental heat.